Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

When in LPR mode in OPS-COM for Android the handheld unit will keep a running list of reads as you patrol. This list will contain flags that give you information about the vehicle being scanned.

Interpreting LPR flags

Here we have a typical LPR display. Notice the last read plate came from the right side Camera (indicated by the orange arrow beside the plate image)

Running Scan Total

The running total of how many reads you have done in a session is located on the right, just above the read list. 
In this case we have 30 reads total.

Preview: Plates in Violation

Reads that are in violation are indicated by a red flag.

Preview: Plates that are Valid

Reads that are valid are flagged as green. Valid reads will list on the handheld unit but will not be chalked or passed into the system as part of the LPR events report.

Preview: Plates Chalked

Reads that are still in the grace period configured in your system will be indicated by an orange flag.

Toggle PL8-RDR Functionality

When editing a plate read the system will go into offline mode.  This is indicated by the green button shown below changing to red.

To continue scanning plates be sure to engage the ON button, make sure it's green before continuing.




Related Pages

  • No labels