Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

In the OPS-COM system it is possible for a user to have a permit associated to more than one vehicle. This creates the possibility for misuse of the permit by having more than one vehicle parked using the same permit.


July 2019 - This is currently classified as a BETA function, and is gathering interest with clients.

During this proof-of-concept phase the data is local to the device only and is not shared between handhelds or PL8RDR devices. 

Setting up the Permit Misuse Timer

  1. Select the System Settings menu item

    Image displaying the system settings menu item

  2. Scroll to the Advanced Settings section of the settings, select Permit Sharing and Misuse 

    Image displaying the Permit Misuse Setting

  3. When you select the is a menu will open allowing you to chose the length of time the first vehicle capture will be "remembered" by the system.
    In our example the system will present a warning if the second vehicle is scanned within an hour of the first vehicle scan. After that point the first read is forgotten so to speak and the process starts over again.

    Image displaying the Permit Misuse Timer screen

Permit Misuse Alert

When you search for a vehicle that shares a permit with another that was recently seen, an alert will appear on the device to notify you of possible permit misuse. 

Image displaying the Permit Misuse Alert

Related Pages

Filter by label

There are no items with the selected labels at this time.

  • No labels