Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

In order to pull reports from individual cameras in LPR Events you must add the camera to the Admin Portal. This article explains the process.

Adding a Camera

To begin go to the Violations menu and click on LPR and Chalking. Then click on Camera Setup.

The LPR Camera Configuration Page displays.

Fill in the form with the required information:

  • Camera Name
  • Camera Type (entrance, exit or tracking)
  • Camera IP

You may also want to record the following optional information:

  • Admin link (to access camera configuration
  • Username
  • Password
  • Notes

Click save to complete the process.

Once the camera is configured you are able to look up or edit the information from this intyerface as well.

Clicking on this link will bring you to the actual camera where you log in using the displayed credentials in order to configure or adjust settings on the camera itself.

When complete LPR Events can be set to display data from the specific camera selected.

Related Pages

Filter by label

There are no items with the selected labels at this time.

  • No labels