Adding a Camera
To begin go to the Violations menu and click on LPR and Chalking. Then click on Camera Setup.
The LPR Camera Configuration Page displays.
Fill in the form with the required information:
- Camera Name
- Camera Type (entrance, exit or tracking)
- Camera IP
You may also want to record the following optional information:
- Admin link (to access camera configuration
- Username
- Password
- Notes
Click save to complete the process.
Once the camera is configured you are able to look up or edit the information from this intyerface as well.
Clicking on this link will bring you to the actual camera where you log in using the displayed credentials in order to configure or adjust settings on the camera itself.
When complete LPR Events can be set to display data from the specific camera selected.
Related Pages
| Filter by label (Content by label) | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Show if | ||
|---|---|---|
| ||
No special notes. If you feel any should be added, please add them here. |