Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

  1. To access the system settings, go to System Config and click on System Settings.  In most cases these settings affect the admin side of the application

System Settings Grid

General System Component

Setting Name

DefinitionNotes

Campus Organization Name: Website

Set the name of the Campus/ CompanyOrganization

Organization Name: Handheld

Set the name of the Organization that appears on the handheld

Country

Sets the country where the system is located
Company AddressSet your primary street address here

Timezone

Set the timezone based on closest major city

System Timeout

Set how long the system can be idle before timeout (can be up to 6 hours)
From EmailThis address will be the return address tnat appears in emails sent from OPS-COM

Time offset (mins)

This represents your time offset from greenwich mean time

Using daylight savings

Used to toggle wether or not you are subject to daylight savings time
System TimeoutSet length of time before the admin user is automatically logged out of OPS-COM

Run the Task Scheduler

Used to toggle wether or not your system uses the Task Scheduler

Select how to show dates

Used to set the date format
Landing MessageThis message will be seen on the user side just under the Welcome Banner

Alarm Component

Setting NameDefinitionNotes
Use Alarms SystemControls if the Client can use Alarms moduleAdmins can see, only OPS-COM Team can change.
Alarm Duration

Generic Alarm Append Threshold

Picklist that allows you to determine the type of alarm you want to issue, and what Action you want taken. In addition you chose the Dispatch Sub Category that should be associated with this Alarm.

For example, People Alarms should generate a System Alert with a Sub-Category of Personal Safety Reports.


People Alarm Append ThresholdSame as above
Vehicle Alarm Append Threshold

Stolen Device Append Threshold

Email AddressEmail Address that an alert is sent to
Generic AlarmSame as above
People Alarm

Plate Alarm

Collection Component

Setting NameDefinitionNotes
Days before CRC is elegibleSet the length of time before a ticket is sent to court
MTO Lookups on all recordsPerform an MTO Lookup on all records even if a user profile exists
Include All Unpaid ViolationsWhen Toggled on: Includes all unpaid Violations when sending violation notices.
When Toggled off: Only the violation in question will be included in the letter

Prevent Violation PaymentsPrevents violations from being paid through OPS-COM if they have been sent to collections.
Prevent PurchasesPrevents Users from making any permit purchases if this is enabled and a violation has been sent to collections
Send Letter To AllWhen Toggled on: Send collection letter to all users even if they have been emailed a copy
Deposits Component
Setting NameDefinitionNotes
Use DepositsToggle the use of deposits on or off.
Enable Deposits For Permits

Form Component

Setting NameDefinitionNotes
Default email for sending form entriesThese settings are used to control the Forms Module.

Global Component

Setting NameDefinitionNotes
Disable nightly email notificationsDisable auto-emails during system maintenance
Symbol before the dollar valueWhich currency symbol to use before a dollar valueAccomodates the English format of the dollar value $100.00
Symbol after currency valueWhich currency symbol to use after a dollar valueAccomodates the French format of the dollar value 100,00$

Incidents Component

Setting NameDefinitionNotes
Usaeg Limit

Enable Megdgate nightly script.

Lightweight Directoy Access Protocol Component

Setting NameDefinitionNotes
Log Failed Attepts

Use SSL

Servers

BaseDN

Account Suffix

LDAP username

LDAP password

Student Group Name

Staff Group Name

Licensing Component

Setting NameDefinitionNotes
Permits per yearIndicate the number of permits elegible to be used yearly (Usage Limit)
Violations per yearIndicate the number of violations elegible to be written yearly (Usage Limit)
Temp Permits per yearIndicate the number of temp permits elegible to be used yearly (Usage Limit)
Number of HandheldsIndicate the number of OPS-COM for Android Licenses to be used (Usage Limit)
Mobile PL8RDR CamerasIndicate the number of Mobile Cameras in use by client.
Static LPR CamerasIndicate the number of Static Cameras in use by client.

Locker Component

Setting NameDefinitionNotes
Enable Lockers ModuleToggles the use of the Lockers ModuleAdmins can see, only OPS-COM Team can change.
Tax %Percentage of tax to charge for lockers
Map of LockersUsed to enter a path to a diagram or map image
Receipt Reply To AddressReply to address on receipts if only a locker was purchased

License Plate Recognition Component

Setting NameDefinitionNotes
Possible plate prefixesIndicates the Plate what typically plate reads in your region start with. (ie: 123 for Numbers, ABC for Alpha Characters)
Using Mobile LPRThis checkbox will toggle on or off the use of the LPR functionality on handheld devices.

Parking Component

Setting NameDefinitionNotes
Validation deletion cutoff minutes.Indicate how l,ong a validation record is editable by an admin before it is locked into the syetem.

Payment Component

Setting NameDefinitionNotes
Gateway OnlineToggle to set the status of your payment gateway (Online or Offline)
Invoice NumberAn incremental number for invoices. This can be set the first time you want to issue them.
EFT Settings This is used if you are setup to accept EFT payments through OPS-COM. You must be setup by OPS-COM Team first before you can change anything.Admins can see, only OPS-COM Team can change.

Permit Component

Setting NameDefinitionNotes
Receipt Reply To AddressReply to address for receipts that contain permits
Multiple Plate ValidatorAllow multiple plates in parking validator
Require Payment for RolloversIf enabled, only permits that are paid for and processed can be rolled over.
Show remaining permits

If enabled the number of remaining permits in a lot will be shown to site users. e.g. "32 Remaining".

If disabled the number remaining permits will be replaced with "On Sale" (which hides how many permits are left from users).

Screenshot:

Allow Credit Card ProcessingAllows credit card payments for rolloversAdmins can see, only OPS-COM Team can change.
Personal Information on Permit Print Include personal information on hang tag printing
Require Mailing AddressRequire a mailing address to be completed fully to purchase permits
Show Permit Lots on Landing PageShow parking permit lots on the landing page
Show Only Visible Lots Only show lots with an active visibility flag to the end user
Show Waiting List RankAllow users to see their rank on the waiting list
Show Total Spots TakenWhen being added to a waiting list, show the number of spots that exist within the lot
Enable User Permit PrintingAllow users to print their own permits, this requires you to have a permitPdf message under System Messaging to work. 
Map of Permit AreasThis is the image of your parking map

Security Component

Setting NameDefinitionNotes
Hash and SaltEnable the hashing of passwords. Once set, it should not be turned off Admins can see, only OPS-COM Team can change.
Require Password UpdateRequire password resets after an admin changes the password Admins can see, only OPS-COM Team can change.
Toggle Password ExpiryEnable the use of password expiry Admins can see, only OPS-COM Team can change.
Password Expiry in daysNumber of days before administrator must change their password
Enable Password HistoryPrevent passwords from being reused up to X days Admins can see, only OPS-COM Team can change.
How long to remember old passwordsThe number of days the system will remember old passwords to prevent re-use
Minimum password lengthThe minimum password length for administrator passwords
Enable password strength requirementsUsed to set standards in password creation based on password security strengthAdmins can see, only OPS-COM Team can change.
Numerical CharactersThe minimum number of numbers required
Lower Case CharactersThe minimum number of lower cases needed
Upper Case CharactersThe minimum number of upper case needed
Non-Alpha NumericThe minimum of a Non-Alpha required
Enable Admin LockoutsEnable admin lockouts after X invalid attempts within Y minutesAdmins can see, only OPS-COM Team can change.
Lockout after X AttemptsSets the number of retries with a wrong password before the system will lock you out.
Login attempt timeframeSets the timeframe for wrong entries. For example if you fail 3 trimes within 5 minutes the system will lock out this admin.
Lock the admin out for X minutesSets the length of time in minutes that the admin will be locked out. Set at 120 minutes would mean the admin would be locked out for 2 hours before another attempt at logging in would be allowed.

Third Party Component

Setting Name

Definition

Notes

Twilio Account Number
Admins can see, only OPS-COM Team can change.
Twilio Auth Token
Admins can see, only OPS-COM Team can change.
T2 API Last Successful Fetch
Admins can see, only OPS-COM Team can change.

User Profile Component

Setting NameDefinitionNotes
Prevent Public RegistrationIf disabled, the Admins control the new account registration. Existing users can login but no one can create a profile.
Profile Field VisibilityThis controls the fields for the User Profile page. Refer to this wiki article for an explanation.

Vehicles Component

Enable VIN

Toggles the use of VIN on and offOnly seen and edited by OPS-COM Team

Violation Component

Setting NameDefinitionNotes
Enable Violations Module

Toggles the Violations Module on or off, this effects the web application and handhelds.

If this is toggled off, clients can chalk vehicles but cannot issue violations.


Hide Zero Dollar FinesWhen enabled, this prevents $0.00 violations, that are not warnings, from being displayed on the userside. These violations will still show up on the Admin side and will show on the Report by Officer and the Violation Summary by Officer report.
Days until due / Due dateIndicates the number of days from the issue date that a user has to pay a ticket before it becomes overdue.
Include Random Pin on Handheld TicketsSelect this item if you wish your users to have the ability to pay violations anonymously. The PIN number is required in order to pay anonymously.Admins can see, only OPS-COM Team can change.
Enable Anonymous Payments for Violations

Handheld FooterThis is the message that will be applied to the end of each ticket that gets printed from the handheld. This footer is for violations only. Admins have the ability to change these settings on their own. 
Clear Violations Paymants

Appeal daysIndicates the number of days a user has to launch an appeal.
Link Violations to usersWhen enabled allows violations to be the user instead of a vehicle.

Admins can see, only OPS-COM Team can change.

Refer to this wiki article for information about using Violations linked to Users.

The prefix to go in front of the ticket number.These characters will appear before the ticket number on the printed ticket.Admins can see, only OPS-COM Team can change.
The next number for printing tickets from the webSets the next sequential number to be on tickets printed from the web toolAdmins can see, only OPS-COM Team can change.
Show Drivers License on TicketsWhen selected, shows Licence number and Province of issuance on ticket
Show Ticket # as barcode on ticketWhen selected will print a bar code representing the ticket number on the ticket


Related Content

Filter by label (Content by label)
showLabelsfalse
showSpacefalse
cqllabel = "settings" and space = currentSpace()



Show if
special@authenticated


Support Agent Notes

No special notes. If you feel any should be added, please add them here.

Tomahawk System Settings Grid (This is a work in process)

General System Component

Setting Name

DefinitionNotes
Support PlanSelect the level of support the clioent has purchased.
Using Faveo SupportToggle Faveo support on or off for this cleint
Show Debug ErrorsToggle logging debug errors on or off for this cleint
Faveo Organization IDIndicate the client's Faveo Organization ID.

Alarm Component

Setting NameDefinitionNotes
Use Alarms SystemControls if the Client can use Alarms moduleAdmins can see, only OPS-COM Team can change.
Email AddressEmail Address that triggers an alert

Automatic Login Component

Setting NameDefinitionNotes
AutoLogin Secure KeyEnter the AutoLogin Secure Key
Deposits Component
Setting NameDefinitionNotes
Use DepositsToggle the ability to use deposits on or off 

Form Component

Setting NameDefinitionNotes
Enable Forms ModuleToggle on and off the ability to use the Forms Module

Global Component

Setting NameDefinitionNotes
Email Header Imageselect a path to a specific image
Default Country Code

Default Country Code

Default Language

Incidents Component

Setting NameDefinitionNotes

Lightweight Directoy Access Protocol Component

Setting NameDefinitionNotes

Licensing Component

Setting NameDefinitionNotes

Locker Component

Setting NameDefinitionNotes
Enable Lockers ModuleToggles the use of the Lockers ModuleAdmins can see, only OPS-COM Team can change.


Clear Unpaid Lockers at Midnight

Enable Locker User Types

License Plate Recognition Component

Setting NameDefinitionNotes

Parking Component

Setting NameDefinitionNotes

Payment Component

Setting NameDefinitionNotes
EFT Settings This is used if you are setup to accept EFT payments through OPS-COM. You must be setup by OPS-COM Team first before you can change anything.Admins can see, only OPS-COM Team can change.

Permit Component

Setting NameDefinitionNotes
Allow Credit Card ProcessingAllows credit card payments for rolloversAdmins can see, only OPS-COM Team can change.

Security Component

Setting NameDefinitionNotes
Hash and SaltEnable the hashing of passwords. Once set, it should not be turned off Admins can see, only OPS-COM Team can change.
Require Password UpdateRequire password resets after an admin changes the password Admins can see, only OPS-COM Team can change.
Toggle Password ExpiryEnable the use of password expiry Admins can see, only OPS-COM Team can change.
Enable Password HistoryPrevent passwords from being reused up to X days Admins can see, only OPS-COM Team can change.
Enable password strength requirementsUsed to set standards in password creation based on password security strengthAdmins can see, only OPS-COM Team can change.
Enable Admin LockoutsEnable admin lockouts after X invalid attempts within Y minutesAdmins can see, only OPS-COM Team can change.

Third Party Component

Setting Name

Definition

Notes

Twilio Account Number
Admins can see, only OPS-COM Team can change.
Twilio Auth Token
Admins can see, only OPS-COM Team can change.
T2 API Last Successful Fetch
Admins can see, only OPS-COM Team can change.

User Profile Component

Setting NameDefinitionNotes

Vehicles Component

Violation Component

Setting NameDefinitionNotes
Link Violations to usersWhen enabled allows violations to be the user instead of a vehicle.

Admins can see, only OPS-COM Team can change.

Refer to this wiki article for information about using Violations linked to Users.

The prefix to go in front of the ticket number.These characters will appear before the ticket number on the printed ticket.Admins can see, only OPS-COM Team can change.
The next number for printing tickets from the webSets the next sequential number to be on tickets printed from the web toolAdmins can see, only OPS-COM Team can change.
Include Random PIN on  handheld TicketsSelect this item if you wish your users to have the ability to pay violations anonymously. The PIN number is required in order to pay anonymously.Admins can see, only OPS-COM Team can change.
Enable Anonymous payments for violationsWhen selected, allows anonymous payments for violations.Admins can see, only OPS-COM Team can change.