Pairing the Printer

1. Go into the device settings and select Connections, then Bluetooth. The printer you are attempting to pair with should be listed as available. In this case we see the ZQ520BT printer is available.
   Image RemovedImage Added
2. Tap the printer name to begin pairing. A number will appear on the printer screen as well as on the Android device. A message instructing you to ensure the numbers match will also appear. Press the check mark button on the printer and then tap the message on the Android device. You will see a message indicating the pairing was successful. If not simple repeat the process.
   Image RemovedImage Added

Setting up the Printer for Use

1. You must install from the Google Playstore the Zebra Printer Setup Utility.
   Image RemovedImage Added
2.  This utility will allow you to set up the configuration for the printer. (Media size, Orientation etc.)
   Image RemovedImage Added
3. Click on the Media Settings menu and click on Media Settings.
   Image RemovedImage Added
4. In Media settings we are setting up for a 3x7 printer roll. To do this enter the following:
   

    - Set the format to Receipt
    - Set the width to 3.1
    - Set the Length to 7.85
    - Set the Orientation to Inverted
   Image RemovedImage Added

5. Tap Next.
6. Set the Media Type to Continuous. 
7. Set The Type of Transfer to Direct Thermal.
8. Set The Mobile Handling to Rewind.
9. Tap Next
   Image RemovedImage Added
10. On the last screen tap Apply.
    Image RemovedImage Added
11. On the Media Settings screen tap Print Test Label to check that the print is centered and oriented properly.
12. You are now ready to select the printer from apps on the Android device.

...