Setting up Alarms in OPS-COM
please refer to the following article Guide to System Settings to see how we can set up Generic, People, and Plate Alarms. We can get to the alarm settings by going to System Settings → Alarms
Additional OPS-COM Triggers
Warning Email Trigger List
See the child page or click the following URL: https://wiki.ops-com.com/x/BIZTAg
Email Alert List
See the child page or click the following URL: https://wiki.ops-com.com/x/9oVTAg
How to Use Plate Alarms
Plate alarms are triggered when a plate in the system has an alarm attached to it. This alarm will be triggered by Fixed Cameras (Entrance and Exit Cameras), Handheld Violation Entry by Officers, and LPR Camera Reads. Not only is there an alarm that is triggered but you can also provide an email to send the alarm details to. If a fixed camera was used then the name of that camera will be listed on the Plate Alarm. Keep in mind that manually Chalking Vehicles does not trigger the alert.
Attaching an Alarm to a Plate without a Profile
Finding the Plate
If there is a plate in the system that does not have an associated profile, we can perform a search on the PLATE by going into Violations → Vehicles → Search by Plate
Enter the plate we wish to search and then click on the Vehicle Info, in this example I have added a plate with no profile LKD892.
This will bring up a new window that will allow us to edit the vehicle by clicking the Edit Vehicle link. Click this to edit the Vehicle Information.
Adding the Vehicle Alarm
Step 1: Toggle the Vehicle Alarm, you will know this is working as you will see a checkmark in the box.
Step 2: Once you click this you will have an option to add the Alarm Comment which will be seen by officers and admins.
Step 3: Click Update Vehicle to have the vehicle alarm applied correctly.
Now when this plate gets LPR scanned by mobile or fixed cameras you ding sound is made so offices in cars will notice it and can write a dispatch report before moving on.
Attaching an Alarm to a specific User's Vehicle
If you know the user you wish to add the plate alarm to, we can do this by going into this users profile from the admin side and clicking Vehicles
Once there you should see a list of vehicles and the plate associated to them. Click the plate to get to the Vehicle Information 
See Adding the Vehicle Alarm under Attaching an Alarm to a Plate without a Profile for instructions on adding the actual alarm.
How to Use Profile Vehicle Alarms
We can also add an alarm to the users profile as well as the users plates. We can do this by going to the users profile and clicking Edit
Once you are in the user's profile you should see Plate alarm and People alarm to the right
We will need to toggle the alarms we wish to add to the users profile, only the Licence Plate Alarm will offer a comment section.. these comments are seen at the top of the users profile where you clicked in the Edit. (See the image above where we showed you how to edit the users profile)
How to Use People Alarms
People alarms are added the same way as the profile License Plate Alarms except they are only triggered for things like AccessCards, Gates, etc.. and there are no comments necessary for People Alarms.