| Table of Contents | ||
|---|---|---|
|
Introduction
The database importer allows the admin to import their existing information into the Tomahawk OPS-COM system. Given a CSV file, the importer will transfer the data into the selected destination table.
...
Support for additional tables will continue to be added in the future.
...
Initial Setup
The database importer can be found listed under the tools tab.
...
For more information on permissions, refer to this article: https://wiki.ops-com.com/x/B4DjAQ
...
...
Importing Data into a Table
To start a new import, click on the upload button next to the destination table the information will be imported into.
...
Once the CSV file has been uploaded, the table import screen will appear.
...
Column Matching
On this page, the columns in the imported file are matched to the columns existing in the destination table.
...
Another import cannot be started until the current one is either completed or has been terminated. Terminating the progressing import will delete the temp tables created during the import, and isn’t recommended unless the import has become stuck.
...
...
Post-Import Processing
After the initial import of the data into the base table, some tables run additional processing on the information.
...
After this process has been completed, the user will be sent a second email containing the final details of the import, including how many records were imported, updated, and any post-processing details.
Permits
If the user association column is matched, the created permit will have a booking automatically created for the associated user through the creation of a PermitJoin record.
If the option was selected, the newly-created permits that were booked to users will be automatically marked as paid. Otherwise, they will be located in the users' carts and the users must pay for them.
UserProfile
When users are imported, if they aren't provided a LoginSource, it will be automatically set to OPSCOM.
Users that are created are set to enabled automatically.
Vehicle
If the user association column is matched, the created vehicle will be automatically associated to the user through the creation of a VehicleJoin record.
If the alert column is matched, an alert will be created and automatically attached to the associated vehicle through the creation of an AlertComments records. The vehicle will also be flagged.
Violations
Any violations created that don’t have an Issued date and Due date will have one created for them at the time of the import.
OffenseLocations
This table has no post-processing.
...
Additional Settings
Additional details on import settings.
Order of Operations
Imports that contain related information have a general order they should be done in, as some of the tables contain information from another table.
...
Table Import | Requires | Notes |
|---|---|---|
UserProfile | Should be the first thing imported. | |
Vehicles |
| Having the user record created before the vehicle is what allows the user to be associated to the vehicle by a vehicleJoin record created during the post-import processing. |
OffenceLocations | Doesn’t require any data beforehand, but should be included when creating a violation. | |
Permits |
| Having a vehicle record created before the permit is what allows the permit to be associated to the vehicle by a permitJoin created during the post-import processing. If there is also an associated user record, the permit is able to be marked as paid by joining the user and permit through a payment record. |
Violations |
| A violation requires the existence of a vehicle record beforehand to have the violation be created at all. Offence locations should be imported before violations in order for the violation to have its location properly marked. |
User-Association Settings
Some tables have additional processing that is run after the import is completed to associate the newly-created records to existing users.
...
The tables that currently have this as an option are:
Vehicles
Permits
Mark Permits as Paid
Permit importing has an additional option for if you would like to have the booked permits that are created automatically marked as paid.
Otherwise, when they are created, they will be located in the associated users' carts.
Vehicle Alerts
Vehicle importing has an additional option for setting up an alert on a vehicle automatically when they are created.
...
The list of vehicles being marked with alerts may also be called a hotlist.
Unique Identifiers & Duplicate Settings
This is the column that is used to tell if the information in the record is unique. If the information in this column is duplicated in the file or already exists in the system, it will be ignored or overwritten based on the selected setting.
...
UserProfile uses one identifier, which can either be UserUUID or Email. For this table, it is one or the other, with UserUUID taking precedence over Email if both columns are supplied.
OffenceLocations uses one identifier, which is LocationName.
Vehicle uses one identifier, which is Plate.
Permits uses two primary identifiers, PermitNo and LotNameID. Both are required to make a unique record, meaning identical PermitNo can be in use if they have different LotNameIDs.
Violations uses one identifier, which is Ticket.
Foreign Lookup Columns
Some information in one table comes from another table and is stored as an ID in the destination table.
...
A list of the import tables are listed below.
UserProfile Table
Inserting Into | Sourced From Table |
|---|---|
prov | Provinces |
UserTypeID | UserTypes |
Vehicle Table
Inserting Into | Sourced From Table |
|---|---|
ProvID | Provinces |
ColourID | VehicleColours |
MakeID | VehicleMake |
TypeID | VehicleType |
PlateTypeID | VehiclePlateType |
Permits Table
Inserting Into | Sourced From Table |
|---|---|
LotNameID | LotName |
StateID | PermitState |
Violations Table
Inserting Into | Sourced From Table |
|---|---|
VehicleID | Vehicle |
TicketType | TicketCategory |
LocationID | OffenceLocations |
Status Emails
Over the course of the import process, a total of two emails will be sent to the user who initiated the import:
The first email is sent after the data from the CSV has been inserted into the temp table, and records the number of rows that were successful, and the rows that failed to be imported because they were malformed.
The second email is sent after the data has been inserted into the base table. It contains the number of records that were updated in the base table, the number of records inserted into the base table, and any relevant information from the post-import processing that happened.
...
Table Reset
In addition to table imports, the page also allows for the purging of a table.
...
Note that only the table contents are deleted, and the table itself remains intact.
Related Pages
| Child pages (Children Display) | ||
|---|---|---|
|