The first step is to Set up permit allocations. To access Permit Allocations hover over Allocations (The clock icon) and select Permit Allocations from the drop down menu.
...
We will now need to set up Permits for this lot. To access the permit setup. Hover over Lot Administration to display the submenu and select Allocate.
As you can see at this point in the process the lot has been created but there are no permits associated with the lot.
As a best practice notice there are gaps between permit numbers in as much as we don't have any lots that permit numbers end and start in sequence.
That is to say we don't have a permit numbers 1 through 10 in one lot and then the next lot starts at 11 to 20 for example.
Note: It is always a good idea to leave a gap in case the lot changes over time. For example if a series of parking spots were redrawn to allow narrower spots for motorcycle parking,
the number of spots in a lot would increase. Having the gap allows the administrator to add permits to an existing lot.
In our example we will be allocating 100 permits to the lot numbered 520 through 619. Once you have updated the start and end range for this lot Click Update Lot to submit your changes.
A pop up will appear confirming your action.
Upon return to the Permit Number Administration page note that the lot now has permit numbers listed.
To view the actual permits click on the Lot name (Parkade Level 1)
This will display a list of permits as shown below.
