Static LPR Checklist - Tattile

This page describes the configuration of a Static (Vega Model) camera to work with the OPS-COM system.

System

Obtain the device IP address and other network details from your IT department.
Configure the camera to be recognized as a standard network device.

Changes on this panel will reboot the device.

The NetBios Name is the name of the device on your network. Choose a descriptive name for the camera.

Spaces and other special characters are not supported.

Required fields are:

Time Server (use your own or one of these)

Changes on this panel will reboot the device.

Configure the site address which should be client_subdomain : CLIENT_ID (no spaces)

Your subdomain is the first part of your OPS-COM.com web portal address.

As an example, the demo Tomahawk University is located on the web at tomahawku.ops-com.com and the entry here would be tomahawku:OC_TOMA

If you are unsure of the client_subdomain or CLIENT_ID please contact OPS-COM support

Changes on this panel will reboot the device.

For faster plate reads you can adjust the capture area
Typically factory defaults to full frame
For PL8RDR, it is necessary to create padding around the capture area (minimum 30 pixels)
- In this example we have modified the factory defaults by 10% all around
Click on Show Iris Window to see the bounding box.

Usually unnecessary to make changes in this advanced area.

As directed by OPS-COM support staff adjustments may be made to specific camera properties.

READ (key fields)
- Enabled = Yes
- Server IP = 159.203.51.51
- Server Port = 32000
- Message = %PLATE_STRING%IMAGE_BW%IMAGE_COL%PLATE_MIN_X%PLATE_MIN_Y%PLATE_MAX_X%PLATE_MAX_Y

|

NO_READ (key fields)
- Enabled = Yes
- Server IP = 159.203.51.51
- Server Port = 32000
- Message = %PLATE_NOT_READ%IMAGE_BW%IMAGE_COL%PLATE_MIN_X%PLATE_MIN_Y%PLATE_MAX_X%PLATE_MAX_Y

Select to edit the configuration by selecting the Config button

Add %SITE_ADDRESS to the field Other custom TAGS