Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Info
iconfalse

This article demonstrates how to set up the Parking Logix integration and display a map on the user side using system messaging. 

Table of Contents


Enable Parking Logix Integration

Before you can use the Parking Logix integration on your system you will need to navigate to your Third Party settings under System Settings.

From there you should see the option to enable Parking Logix Integration

Adding the Lot 

Next, add a new lot to your system making sure you include the API code for each lot. It is possible but unlikely that there will be multiple API keys if lot access is split over several keys. 

Warning

It's important to note that you will also need to enter the Parking Logix specific name for the lot and it must match exactly.

For example, in the image below, the Parking Logix name is Mountaineer Garage


Enable the System Task

A system task must be enabled for the Parking Logix sensors to communicate with our system.

This must be enabled by OPS-COM integration staff and you can contact us through support to set this up. Please email support@ops-com.com for assistance.

Once the system task has been run you should see updated on the lot counts under Manage Parking Lot Groups

Displaying the Map on the User Side

Finally, enter the short code on the user side to any of your pages using System Messaging.

For more information on how system messaging works please see: https://wiki.ops-com.com/x/M4QCAw followed by Editing Pages

The short code is[parking_logix] and you can pass addition parameters such as: only, show, filter, or name.  This will restrict the list to show only specific lots.

By design, it will only show lots that have an API key stored in it.

Related Pages

Filter by label (Content by label)
showLabelsfalse
showSpacefalse
sorttitle
cqllabel = "ops-com" and space = currentSpace()


Show if
special@authenticated


Support Agent Notes
    No special notes. If you feel any should be added, please add them here.
    • The API Key and Parking Logix Lot Name will be provided by Parking Logix. 
    • The System Task must be set up for this to work properly. 
    • The Shortcode must be added to a page for the map to be displayed.