Enable Parking Logix Integration
Before you can use the Parking Logix integration on your system you will need to navigate to your Third Party settings under System Settings. From there you should see the option to enable Parking Logix Integration. 
Adding the Lot
Next, add a new lot to your system making sure you include the API code for each lot. It is possible but unlikely that there will be multiple API keys if lot access is split over several keys.
| Warning |
|---|
Its important to note that you will also need to enter the Logix specific name for the lot and it must match exactly. For example, in the image below, the Logix name is Mountaineer Garage. |
Enable the System Task
A system task must be enabled for the Parking Logix sensors to communicate with our system. This must be enabled by OPSCOM and you can contact us by support to set this up. Please email support@ops-com.com for further assistance. Once the system task has been run you should see updated on the lot counts under Manage Parking Lot Groups
Displaying the Map on the Userside
Finally, enter the shortcode on the userside to any of your pages using System Messaging. For more information on how system messaging works please see: https://wiki.ops-com.com/x/M4QCAw followed by Editing Pages.
The shortcode is [parking_logix] and you can pass extra parameters such as only/show/filter/name that will restrict the list to only show specific lots.
By design, it will only show lots that have an API key stored in it.
Related Pages
| Filter by label (Content by label) | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Show if | ||
|---|---|---|
| ||
No special notes. If you feel any should be added, please add them here. |